Loading... Please wait...

Account Navigation

  • Gift Certificates
  • Wish Lists
  • My Account
  • Order Status

BEARINGS

You're Looking At The Most Efficient Bearings On The Planet

LOOKING FOR A FAST AND EASY WAY TO INCREASE YOUR FUEL MILEAGE? MICROBLUE® WHEEL BEARINGS WILL "GET 'ER DONE"!

WITH INCREASES AVERAGING 4/10THS. FOR 3-AXLE TRACTOR SETS AND TRAILER SETS NETTING ANOTHER 2 TO 4/10THS, YOU'LL SEE A PAYBACK IN LESS THAN 6 MONTHS.

Everything that moves uses bearings of different types. From the steer axle to the drive axles and everything in between. Bearings are everywhere and they make more friction and heat than you might realize. On top of all that, they all wear out.

MICROBLUE WHEEL BEARINGS - WHAT ARE THEY?
Simply put, they are high quality tapered bearings with polished rollers and races that are coated with MicroBlue®, the only coating that changes the way lubricants work. The result is an performance improvement that will surprise you. For example, you should expect to see 3-4/10ths mpg improvement with a three-axle tractor set and 2-4/10ths on a two-axle trailer or drive set.

ABOUT BEARING LIFE – HOW LONG WILL THEY LAST?
After supplying bearings to the racing industry for over ten years, nobody has ever told us they've worn any of them out. And the "why" is due to the way it improves lubricant properties. And this "atomic interaction" is based on physics and chemistry. What this means to you, is unlike a gallon of milk, there's no expiration date. Which means it lasts forever. So when it comes to class 8 trucks, we’re not the least bit concerned about them lasting over 1 million miles, and you shouldn't be either.

ORDERING BEARINGS – HOW DO I GET THEM?
That's simple, just give us a call at 704-489-2216. If you happen to know the bearings you need, fine. If not, we'll need the make, model and year of your truck or trailer. If you're driving anything other than a Peterbilt or Kenworth, have the last 8 of your VIN handy. We have all the bearings in stock, and typically ship the same day!

 

“OF ALL THE THINGS I'VE DONE TO THIS TRUCK, DOLLAR FOR DOLLAR, NOTHING HAS COME CLOSE TO THE GAINS IN MILEAGE AND RIDE QUALITY THAT I'VE SEEN WITH THE MICROBLUE BEARINGS. I'M IMPRESSED"
Joe Wilcox

THINGS YOU NEED TO KNOW:

• We stock all the popular sizes of bearings for all the common tractor/trailers on the road. You simply place an order with us, and they go out the same day. It’s easy.  

• We include bearing removal and install instructions with every order. And its important they’re followed to the letter. How the races are removed and how the bearing end-play is adjusted will have everything to do with how much fuel mileage improvement you will see.

• There are no special lubrication requirements with our bearings. Actually, any of the common lubricants will work and cause no problems. However, due to the efficiency of MicroBlue® bearings, we recommend using a common 50 wt. synthetic transmission lubricant in the steers and trailer hubs. Which brand is not particularly important. More information can be found HERE. 


• Temperature reductions are significant. Typically you can expect MicroBlue® bearings to run somewhere between 15 to 25 degrees above ambient temperature, with 20 degrees being the norm. If, after installation you are seeing temperatures much higher than this, they were more than likely set up with too little end play. They need to be set between .003” and .005”, nothing less. Read more HERE.

 

microblue-ring-gear.jpg

 

     
Back to Top